HJC 3G RO Membrane for high TDS water

Technical Specifications

The stated product performance is based on data taken after 30 minutes of operation at the following test conditions:

• 200 mg/L NaCl solution at 60 psi applied pressure.
• 15% recovery
• 77 °F (25 °C)
• pH 6.5–7.0

Permeate flow rate for each element may vary but will be no more than 15%.

All elements are vacuum sealed in a polyethylene bag at standard dry membrane without any water testing.

APPLICATION DATA:

Operating Limits

• Max. Operating Pressure :300psi
• Max. Feed Flow Rate: 2 gpm (0.45 m3/hr)
• Max. Operating Temperature :45°C.
• Operating pH Range: 2.0–11.0
• Max. Turbidity :1.0 NTU
• Max. SDI (15 min) :5.0
• Max. Chlorine Concentration < 0.1 mg/L